天津职业技术师范大学学报

[1]刘礼容,李晓.浅析现代物流仓储管理的特点和任务[J].中小企业管理与科技:上旬刊,2012(7):48-49.

[2]芦广明.浅谈仓储管理在物流管理中的重要性及发展趋势[J].物流工程与管理,2012,34(8):32-33.

[3]BENOIT P G,LIP H T,ROMAIN X B,et al.Influence of pallets on the behaviour and design of steel drive-in racks[J].Journal of Constructional Steel Research,2014,97(10):10-23.

[4]沈新.货架[J].物资经济研究,1986(2):25-27.

[5]孟纪琳.仓储货架市场需求与企业发展模式探索[J].物流技术与应用,2012,17(2):84-85.

[6]牛秀明.货架——仓储的中流砥柱[J].物流技术:装备版,2012(12):82-83.

[7]武振宇,成博.驶入式钢货架动力特性试验研究[J].振动与冲击,2014,33(15):65-70.

[8]密集化仓储系统建设中的货架应用与创新[J].物流技术与应用,2013,18(2):65-66,68-70.

[9]王转.重力式货架仓库的特点及发展概况[J].物流技术,1997(1):16-20.

[10]EHAB E,BEN Y.Response to discussion on“Numerical simulation of concrete encased steel composite columns”[J].Journal of Constructional Steel Research,2011,67(2):211-222.

[11]杨红芳.浅谈驶入式货架[J].科技资讯,2010(27):60.

[12]GODLEY M H R,BEALE R G,FENG X.Analysis and design of down-aisle pallet rack structures[J].Computers and Structures,2000,77(4):391-401.

[13]BALDASSINO N,BERNUZZI C.Analysis and behaviour of steel storage pallet racks[J].Thin-Walled Structures,2000,37(4):277-304.

[14]SARAWIT A T,PEKOZ T.Design of industrial storage racks[C]//SARAWIT A.Proceedings of 16th international specialty conference on cold-formed steel structures.Orlando:ThinWalled Structures,2002:369-384.

[15]RMI.Specification for design,testing,and utilization of industrial steel storage racks[S].Charlotte:Rack Manufacturers Institute,1997.

[16]张卫国.驶入式货架的设计及其标准[J].物流技术与应用,2010,15(3):88-91.

[17]GILBERT B P,RASMUSSEN K J R.Drive-in steel storage racks I:Stiffness test and 3D load transfer mechanisms[J].ASCE J Struct Eng,2012,138:135-147.

[18]许晓润,王转,程国全,等.基于Ansys的驶入式货架有限元分析[J].起重运输机械,2012(8):68-71.

[19]何平.基于有限元分析的货架结构力学性能研究[J].机械制造,2008,46(9):30-32.

[20]AGUIRRE C.Seismic behavior of rack structure[J].Journal of Constructional Steel Research,2005(5):607-624.

[21]IOSIF F S,DAN D.Rencent research advances on the ECBL approach—Part II:Interactive bucking of perforated sections[J].Thin-Walled Structures,2004(2):195-210.

[22]张银龙,苟明康,梁川.钢结构稳定性设计方法的发展综述及分析[J].钢结构,2008,23(7):1-6.

[23]贾争现,曹西京,刘昌祺.AS/RS货架的强度计算及设计[J].物流技术,2003(3):72-75.

[24]谢云舫,黄亚宇.基于ANSYS的重型货架的有限元分析[J].机械研究与应用,2005(5):85-86.

[25]ARLENE M S F,FLAVIO T S,MARCILIO S R F.Analysis and behavior of steel storage drive-in racks[J].Thin-Walled Structures,2009,48(2):110-117.

[26]翁迅,程国全,高青风.特种结构货架有限元分析[J].起重运输机械,2004(6):36-38.

[27]王拓,赵宪忠,陈以一.组装式钢货架结构研究现状[J].建筑钢结构进展,2010,12(6):1-10.

[28]赵皎云.仓储货架新技术及其应用[J].物流技术与应用,2012,17(2):64.

[29]RMI.Specification for the design,testing and utilization of industrial steel storage racks[S].Charlotte:Rack Manufacturers Institute,2008.

[30]STANDARDS AUSTRALIA.AS4084 Steel storage racking[S].Sydney:Standards Australia,1993.

[31]European Committee for Standardization.EN15512 steel static storage systems-Adjustable pallet racking system-Principles for structural design[S].Brussels:European Committee for Standardization(CEN),2009.

[32]佚名.仓储货架市场需求与企业发展模式探索[J].物流技术与应用,2012,17(2):84-85.

[33]BENOIT P G,KIM J R.Impact tests and parametric impact studies on drive-in steel storage racks[J].Engineering Structures,2011,33(5):1410-1422.

[34]马笑.货架的困惑与对策[J].物流技术:装备版,2011(6):39-41.

[35]金跃跃.中国货架行业的发展[J].物流技术:装备版,2011(18):94-97.